This is a highly amusing and simple challenge and can be done in such a lot of specific approaches.
This took about three hours to complete.
I chose to visit my local thrift shop to find honestly satisfactory targeted frames at a notable price.
The frame I decided on for this task value $6 (Original rate tag on the back turned into $20) in order that became a bargain.
I additionally picked up a small Christmas wreath there for much less than $2.
I used Anne Slaon Chalk Paint Linen that I had from a unique assignment but you can use Regular house flat paint mixing in some Plaster Paris. This is a excellent opportunity to call brands and Good for large tasks. I learned a way to make my own chalk paint on YouTube.
I also had a few material in a canvas beige that I had from a preceding venture. I bought the cloth from Walmart for $2.
For the lettering, I currently bought a Cricut, but you may use stencil or precut letters. In this task I selected the reflect photograph for the Vinyl letters so I can vicinity them on the glass the use of switch tape from Cricut.
In this submit I will show Cricut Application
This is my finished frame.
Here are a couple of frames I bought at Goodwill for my undertaking.
For this one I used the body at the right. It became larger and suit the lettering well.
I eliminated the glass and commenced portray the body with the chalk paint. I used a small brush to fill inside the difficult element regions.
GAMBAR3 After I completely painted the body with three coats I let it dry.
Then I went lower back to sand over the element areas to present it a distressed appearance. I sanded regions randomly. I loved how the dark shades got here out from the authentic color.
This is the final look for the body.
Then the usage of 3/4” eye screws for the striking ribbon. I pre-drilled each top nook of the body. Then I screwed within the hooks. I like those length hooks seeing that they’re huge enough to string the ribbon and small enough to now not be so seen. I bought this complete bundle at Walmart for less than $three
I also like that you may flip the hook easily to regulate the autumn of the ribbon draping the body.
I then disassembled the little wreath I purchased at Goodwill. I then used the pieces to decorate corners of the frame.
It is quality to sand down the region you need to area the decorations. This will permit for higher adhesion for the recent glue.
Glue each piece one after the other for right adhesion.
After placing all decorations I allow the hot glue dry. I then went to create the lettering for the glass.
Using the Cricut Cutter, I created “Merry Christmas” letters that had been ornate to move properly with the body. I also made certain to reduce in a replicate picture so that the letters might be behind the glass.
If you buy precut letters you will want to region them at the front aspect of the glass if they’re the sticky label type.
I then used the switch tape to use to the glass.
Note- on the glass, you could draw traces on the front side that will help you align your letters. Then clean traces off after putting letters.
I find this to be the trickiest component. With endurance and a consistent hand it have to pass smooth.
This is going simpler with a flat tool to assist the letters keep on with the glass higher when casting off the switch tape.
Now I can take the backing from the frame and apply fabric. I like fabric instead of revealed paper for this mission because it gives a pleasant texture. I used a beige canvas from Walmart. The fabric length needed is so small that a yard will go a protracted manner for lots initiatives.
When cutting the material leave an extra inch on each facet. Then warm glue the back to offer it a uniform, tight match. Cut excess cloth and glue edges on the returned side.
At this factor I threaded the ribbon via the attention hooks. I then twisted the hooks to have the ribbon drape on the body. I then used warm glue at the higher corners to preserve the ribbon In place.