Wanna discover ways to construct easy pipe shelves?! This video academic walks you via the whole technique of ways we introduced laundry room shelving.
If you adore this challenge, be sure to subscribe to our weblog to obtain updates often!
Spoiler alert: they are pretty much the easiest DIY shelf EVER! So even if you don’t have much DIY experience or tools, you may totally do that.
Step 1: Cut the wood to size. Our shelves are approximately 28 inches wide, so we just reduce portions of wood down to length.
Step 2: Chamfer Edges. For the edges of the shelves, we chamfered them with a chamfer bit on the router table. F don’t have a router, no issues. You can obtain the quite much identical thing by using sincerely sanding the edges by means of hand.
Step three: Sand wood. Next, give the wooden shelf a mild status. I used our orbital sander, but you can try this by using hand pretty easily too.
Step four: Stain timber. After sanding, wipe the whole lot off and get a few stain on that timber. We used 2 coats of this stain and wiped the whole thing clean whilst completed.
Step five: Seal Wood. Once the stain has fully dried (take a look at packaging), you can seal the wooden. We used this to seal it.
Step 6: Add 1st pipe shelf bracket. First, discover a stud to your wall. Ideally, both brackets could be in studs. We spaced our brackets out exactly sixteen inches so that they both had been able to be drilled into studs. This become perfect for our shelf, which is 28 huge – so the timber overhangs about 6 inches on every side of the bracket.
Once you find the stud to your wall, you could attach the flange by way of drilling into the wall with the screws.
Step 6: Add different pipe brackets to wall. Once you’ve got the primary pipe bracket into the wall, use a level to make sure your different bracket is covered up successfully.
Step 7: Set you wooden on pinnacle.
Decorate and Smile!
Get the ones cabinets adorned and crammed up after which step lower back, pat yourself on the freakin’ returned and smile! You did it!